Carpet Cleaning: Tips to clean carpets that have been damaged by water

Professionals should be hired to clean wet carpets that site. If you don’t want to pay for carpet cleaning, you can dry the carpets yourself and clean them afterwards. You can use these carpet cleaning tips.

The cause of a wet carpet is very important. If your carpets are wet, it is likely clean water from a leaky appliance or pipe. You need to know if the dirty water came from the overflow of a toilet or a neighbor’s pipe. Dirty water contains bacteria that are derived from human excrement, so you should check if the water is clean.

If the water that you used to clean your carpet is dirty it may be necessary to hire Sydney carpet cleaning services or restoration services in order to remove the dirt and clean the carpet. After you have determined that the water used was not dirty, you can clean your carpet. You will first need to vacuum all the water out of your carpet with a wet-vacuum. This must be done immediately to avoid further damage. If you don’t have a wetvac, a local home improvement retailer can rent or sell one to you.

After removing the water from the carpet, you can use fans to dry it. Local retailers and builders’ warehouses sell industrial strength fans. While drying your carpet, you may need to tolerate the noise from fans. After the carpet is completely dry, you will need to disinfect it. You can buy a product to clean and disinfect your carpet. Choose a carpet cleaner that will not stain or discolor the carpet.

Vacuum your carpet thoroughly. Vacuuming the carpet multiple times is required to remove all dirt. It may look clean but this is not true. Water has left microscopic dirt on the carpet. You will probably need to replace your vacuum. Look for vacuums that have different suction levels. Call a Sydney carpet cleaner.

Northern Beaches Carpet Cleaning
90 Mona Vale Rd, Warriewood NSW 2102
(02) 8311 0608

Leave a Reply

Your email address will not be published. Required fields are marked *